3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

7.12
Using the Component LEDs
Messages and Operator’s Guide InForm OS Version 2.3.1
Consult Table 7-4 to verify proper function of the 3PAR Fibre Channel adapter LED.
7.1.5 QLogic iSCSI Port LEDs
The QLogic iSCSI adapter contains two ports. There is one LED for each port as shown in
(Figure 7-6).
Figure 7-6. iSCSI Adapter LEDs
Table 7-4. 3PAR Fibre Channel Port Status LED Indications (3PAR 4-Port Adapter)
LED Appearance Meaning
No light Wake-up Failure (dead device).
Steady green light Normal -- Link up at 2-4 GB/sec.
Flashing green light Link down or not connected.
0514_L_R2
LEDs (2x)
Port 2
Port 1