3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.31
Service Processor LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
6.2.2 Supermicro Service Processor
The Supermicro service processor LEDs are defined in the following section. The LEDs are
located at the top of the service processor (Figure 6-19).
Figure 6-19. Supermicro Service Processor LEDs
Consult Table 6-15 to verify proper functioning of service processor displays.
NIC Port 1 No light .No network activity.
Flashing amber light Indicates network activity.
Power No light The system is off.
Steady blue light Indicates that the system is powered on.
Table 6-14. Wintec Service Processor LED Displays (continued)
LED Appearance Meaning
Table 6-15. Supermicro Service Processor LED Displays
LED Appearance Meaning
Power No light Indicates the service processor is off.
Steady green light Indicates the service processor is on.
Hard Disk Drive LED
NIC Port 2 LED
NIC Port 1 LED
Power LED
Overheat LED
Power Button
0637_L_R1
Reset Button