3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.23
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
6.1.4 3PAR Fibre Channel Port LEDs
The 3PAR Fibre Channel adapters contained in the controller node also contain Fibre Channel
port LEDs. Four port 3PAR Fibre Channel adapters are only used in a P4 InServ S-Class Storage
Server (Figure 6-12).
Figure 6-12. 3PAR 4-Port Fibre Channel LEDs
Consult Table 6-9 to verify proper function of the 3PAR Fibre Channel adapter LEDs.
Table 6-9. Fibre Channel Port Status LED Indications (3PAR 4-Port Adapter)
Yellow LED Green LED Port Status
3PAR Internal Testing Only Off Wake-Up Failure (dead device)
3PAR Internal Testing Only On Normal - Link up at 1-4 GB/sec
3PAR Internal Testing Only Slow Blink Normal - Link Down
0256_L_R1
Port 4
Not
Used (4x)
Port 1
Green (4x)