3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.21
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
Figure 6-11. LSI Logic 4-Port Fibre Channel Port LEDs
Each LSI Logic port in the Fibre Channel adapter has one LED which is either off, green or
amber, depending on its condition.
Table 6-7 on page 6.22 lists all of the LED conditions for the 2-Port LSI Logic Fibre Channel card.
Consult this table to verify proper functionality of the Fibre Channel ports.
Table 6-8 on page 6.22 lists all of the LED conditions for the 4-Port LSI Logic Fibre Channel card.
Consult this table to verify proper functionality of the Fibre Channel ports.
Note: LEDs are Numbered and Correspond with Ports
3 2
1 0
1 2
3 4
0517_L_R1
LEDs
Port 1
Port 2
Port 3
Port 4