3PAR InForm® OS 2.3.1 Messages and Operator's Guide (320-200181 Rev B, February 2010)

6.19
Using the Component LEDs
InForm OS Version 2.3.1 Messages and Operator’s Guide
Table 6-6 on page 6.19 contains descriptions of all LED combinations for the QLogic Fibre
Channel port LED pairs. Consult this table to verify proper functioning of Fibre Channel ports
for QLogic HBAs.
Table 6-6. Fibre Channel Port Status LED Indications (QLogic 2-Port)
Green LED (left) Amber LED (right) Port status
On On Port has power.
On Off Port is connected and online.
Off On Port is receiving signal.
Off Flashing Cable disconnected or loss of
synchronization.
Flashing Flashing Firmware error.