3PAR InForm® OS 2.3.1 Concepts Guide (320-200112 Rev B, February 2010)

6.7
Host Personas
InForm OS Version 2.3.1 3PAR InForm OS Concepts Guide
6.7.1 Legacy Host Personas
A legacy host persona is a host persona that simulates the behavior of a port persona. Prior to
the 3PAR InForm Operating System 2.3.1 release, port personas were used on InServ Storage
Server ports. Port personas are no longer supported. Use the InForm CLI commands or the
InForm Management Console to convert your legacy host personas to new host personas. See
the InForm OS CLI Administrator’s Manual or the InForm OS Management Console Online Help
for instructions on converting your legacy host personas.
7 HPUX-
Legacy
HP-UX VolSetAddr
8 AIX-Legacy AIX NACA
9 Egenera Egenera, NetApp SoftInq
10 NetApp
ONTAP
Data ONTAP SoftInq
Table 6-1. Host Personas (continued)
Persona
Number
Persona
Name
Host Operating
System
Additional
Capabilities
NOTE: Only the Generic, Generic-ALUA, and Generic-Legacy personas are
supported for iSCSI connections.
NOTE: The NetApp host operating system requires unique WWNs for hosts in an
FC fabric.
NOTE: A host device must use either iSCSI or Fibre Channel connections. Mixed
ports on a single device is not supported.