3PAR InForm® OS 2.3.1 Concepts Guide (320-200112 Rev B, February 2010)

14.9
The 3PAR SNMP Agent
InForm OS Version 2.3.1 3PAR InForm OS Concepts Guide
An alert status change event is not an alert. It notifies you that an alert has changed status
(e.g., from New to Resolved by System). The following example shows an alertNotify
trap
translated from an alert status change event:
The following information describes these alert status change events:
Message Code
1245186
Severity
Info
Type
Change in alert state
Alert String
Alert <alert_id> changed from state <old_state> to <new_state>
Operator Action
The alert has changed state. This can be used to track the state of the existing alerts in an
InServ Storage Server.
NOTE: If you receive a trap with messageCode == 1245186, this is to notify you
that an alert has changed state. In order to find out which alert has changed
state, you must extract the alert ID from the
id trap field.
sysUpTime.0:0 hours, 5 minutes, 26 seconds.
snmpTrapOID.0:.iso.org.dod.internet.private.enterprises.threepar.inserv.alertNotify
component.1:comp_sw_alert
details.1:Alert 647 changed from state New to Resolved by System
nodeID.1:1
severity.1:info(5)
timeOccurred.1:Thu Dec 16 14:06:36 PST 2004
id.1:647
messageCode.1:1245186
state.1:autofixed(5)