3PAR InForm® OS 2.3.1 Concepts Guide (320-200112 Rev B, February 2010)
14.7
The 3PAR SNMP Agent
InForm OS Version 2.3.1 3PAR InForm OS Concepts Guide
Table 14-2. Contents of the alertNotify trap
Object Descriptor Description Access
component
Tells you which system hardware, software, or logical
component caused the alert or alert state change.
Read-only
details
Detailed description of the alert or alert state
change, displayed as an alert string (for example:
PR
table <table_name> is corrupt
). See the
InForm OS Messages and Operator’s Guide for exact
content of all possible alert strings. See alertNotify
Traps on page 14.8 for the exact content of the alert
state change notification string.
Read-only
nodeID
Node identification number, an integer from 0
through 7 that indicates which storage server
controller node reported the alert or alert state
change.
Read-only
severity
Severity level of the alert or alert state change, which
is an integer from 0 to 5. See the 3PAR MIB for
definitions for each integer.
Read-only
timeOccurred
Time the alert or alert state change occurred, in
DDD mmm dd hh:mm:ss ZZZ yyyy format (for
example:
Mon, Jan 01 12:30:34 PST 2005).
Read-only
id
Alert ID. The alert ID uniquely identifies an
outstanding alert on some object within the InServ
Storage Server. Alert IDs are automatically generated
by the InForm OS and increment when a new alert on
a new object is detected. Note also that if an alert is
generated on an object and alerts already exist in the
system, the alert ID is removed. For alert state traps,
the alert ID will be the same as the ID of the trap that
indicated the original problem.
Read-only