3PAR InForm® OS 2.3.1 Concepts Guide (320-200112 Rev B, February 2010)

14.6
The 3PAR SNMP Agent
3PAR InForm OS Concepts Guide InForm OS Version 2.3.1
14.4.2.2.4 System Contact Information
Access: Read/write
MIB definition:
sysContact
Data type: Display string (max. 255 characters)
Default value:
Please provide contact information such as name, phone
number, and e-mail address
Description: Specifies the name of a person or group responsible for maintaining the InServ
storage system. This value can be changed via the manager at any time.
14.4.2.2.5 System Name
Access: Read-only
MIB definition:
sysName
Data type: Display string (max. 255 characters)
Default value: None
Description: Indicates the system name, which is set during initialization and setup of the
system. This helps to identify this InServ storage system from other systems. The value cannot
be changed by the manager.
14.4.2.2.6 System Location
Access: Read/write
MIB definition: sysLocation
Data type: Display string (max. 255 characters)
Default value:
Please provide location description where the device
resides such as building, room, and rack number
Description: Contains the user-defined location of the system. This helps to indicate where
the storage system is located. For example, the location may be indicated as follows:
Building 1, room 4, rack 3. This value can be changed via the manager at any time.
14.4.2.3 The 3PAR MIB
The 3PAR MIB contains proprietary information that reflects the configuration and behavior of
the InServ storage system and may be useful for network management. Currently, the 3PAR
MIB only contains the alertNotify trap definition. Table 14-2 on page 14.7 summarizes the
contents of this trap.