3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

7.8
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
checkpd
DESCRIPTION
The checkpd command executes surface scans or diagnostics on physical disks.
SYNTAX
checkpd scrub|diag [options <arg>] <pd_ID>...
AUTHORITY
Super, Service
OPTIONS
The following options can only be used with the scrub specifier:
-ch <number>
To scan a specific chunklet rather than the entire disk.
-count <number>
To scan a number of chunklets starting from -ch.
The following options can only be used with the
diag specifier:
-path <p>
Specifies a physical disk path as a, b, both, or system.
-test <type>
Specifies read, write, or verify test diagnostics. If no type is specified, the default is read.
-iosize <size>
Specifies I/O size, valid ranges are from 1s to 1m. If no size is specified, the default is 128k.
-threads <num>
Specifies of I/O threads, valid ranges are from 1 to 4. If the number of threads is not
specified, the default is
1.
NOTE: You need access to all domains in order to run this command.