3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

30.4
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
upgradepd
DESCRIPTION
The upgradepd command upgrades the Physical Disk (PD) firmware.
SYNTAX
upgradepd [-f] [-skiptest] {-a | -w <WWN>... | <PD_ID>...}
AUTHORITY
Super, Service
OPTIONS
–f
Upgrades the PD firmware without requiring confirmation.
–skiptest
Skips the 10 second diagnostic test normally completed after each PD upgrade.
–a
Specifies that all PDs with valid IDs and whose firmware is not current are upgraded. If this
option is not specified, then either the
–w option or PD_ID specifier must be issued on the
command line.
–w <WWN>...
Specifies that the firmware of either one or more PDs, identified by their WWNs, is
upgraded. If this option is not specified, then either the
–a option or PD_ID specifier must
be issued on the command line.
SPECIFIERS
<PD_ID>...
Specifies that the firmware of either one or more PDs identified by their IDs (PD_ID) is
upgraded. If this specifier is not used, then the
–a option or –w option must be issued on
the command line.
NOTE: You need access to all domains in order to run this command.