3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

28.10
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
tunepd
DESCRIPTION
The tunepd command identifies physical disks with high service times and optionally executes
load balancing.
SYNTAX
The syntax for the tunepd command can be one of the following:
■ tunepd [options <arg>] maxsvct <msecs>|highest
■ tunepd [options <arg>] avgsvct <msecs>|highest
AUTHORITY
Super, Edit
OPTIONS
–nodes <node_list>
Specifies that the display is limited to specified nodes and physical disks connected to those
nodes. The node list is specified as a series of integers separated by commas (
1,2,3). The
node list can also consist of a single integer (
1). If the node list is not specified, all disks on
all nodes are displayed.
–slots <slot_list>
Specifies that the display is limited to specified PCI slots and physical disks connected to
those PCI slots. The slot list is specified as a series of integers separated by commas (
1,2,3).
A list can also consist of a single integer (1). If the slot list is not specified, all disks on all
slots are displayed.
NOTE: You need access to all domains in order to run this command.
NOTE: If the -nodes, -slots, -ports, or -vv options are not specified, all
physical disks are included.