3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

27.2
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
syncrcopy
DESCRIPTION
The syncrcopy command manually synchronizes Remote Copy volume groups.
SYNTAX
syncrcopy [options] <group_name>
AUTHORITY
Super, Edit
OPTIONS
–w
Wait for synchronization to complete before returning to a command prompt.
–n
Do not save resynchronization snapshot. This option is only relevant for asynchronous
periodic mode volume groups.
–ovrd
Force a full synchronization of the group even if the volumes are already synchronized.
This option is only relevant for synchronous mode volume groups and can be used to
re-synchronize volumes that have become inconsistent.
-t <target_name>
Synchronize the group only to the specified target.
SPECIFIERS
<group_name>
Specifies the name of the Remote Copy volume group to be synchronized. This name can
be obtained using the
showrcopy command, as described on page 22.145.
NOTE: Using the -n option requires a full synchronization at the next sync.