3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

26.6
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
stoprcopygroup
DESCRIPTION
The stoprcopygroup command stops the Remote Copy functionality for the specified
Remote Copy volume group.
SYNTAX
stoprcopygroup [options] <group_name>
AUTHORITY
Super, Edit
OPTIONS
–nosnap
In synchronous mode, this option turns off the creation of snapshots. This is useful if
removercopygroup is to be run to remove Remote Copy. In asynchronous periodic mode,
this option deletes any current synchronization snapshots. Using this option will result in a
full resync being required if the group is later restarted.
-t <target_name>
Stops the group on the specified target.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group to stop.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
more information.
EXAMPLES
The following example stops Remote Copy for Group1:
cli% stoprcopygroup Group1