3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)
26.4
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
stoprcopy
DESCRIPTION
The stoprcopy command stops the Remote Copy service and optionally stops any started
Remote Copy volume groups.
AUTHORITY
Super, Edit
SYNTAX
stoprcopy [options]
OPTIONS
–f
Specifies that any started copy will not ask for confirmation for the -clear option.
–stopgroups
Specifies that any started Remote Copy volume groups are stopped.
–clear
Specifies that configuration entries affiliated with the stopped mode are deleted.
SPECIFIERS
None.
RESTRICTIONS
If the –stopgroups option is not used, all groups must already be stopped.
NOTE: You need access to all domains in order to run this command.
CAUTION: Issuing the stoprcopy -clear command completely removes the
Remote Copy setup and is NOT reversible.