3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

25.33
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
statport
DESCRIPTION
The statport command displays read/write (I/O) statistics for ports.
SYNTAX
statport [options]
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
–both|–ctl|–data
Show data transfers only (–data), control transfers only (–ctl), or both data and control
transfers (
–both). If no option is included on the command line, the command shows data
transfers only.
–nodes <node_list>
Specifies that the display is limited to specified nodes and Physical Disks (PDs) connected to
those nodes. The
node_list is specified as a series of integers separated by commas (for
example
1,2,3). The list can also consist of a single integer (for example 1). If the node list
is not specified, all disks on all nodes are displayed.
–slots <slot_list>
Specifies that the display is limited to specified PCI slots and PDs connected to those PCI
slots. The
slot_list is specified as a series of integers separated by commas (for example
1,2,3). The list can also consist of a single integer (for example 1). If the slot list is not
specified, all disks on all slots are displayed.
–ports <port_list>
Specifies that the display is limited to specified ports and PDs connected to those ports.
The
port_list is specified as a series of integers separated by commas (for example
1,2,3). The list can also consist of a single integer (for example 1). If the port list is not
specified, all disks on all ports are displayed.