3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

25.25
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
statpd
DESCRIPTION
The statpd command displays the read/write (I/O) statistics for physical disks in a timed loop.
SYNTAX
statpd [options]
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
–w <WWN>
Specifies that statistics for a particular Physical Disk (PD) identified by World Wide Names
(WWNs) are displayed.
–nodes <node_list>
Specifies that the display is limited to specified nodes and PDs connected to those nodes.
The
node_list argument is specified as a series of integers separated by commas (1,2,3).
The list can also consist of a single integer (
1). If the node_list argument is not specified, all
disks on all nodes are displayed.
–slots <slot_list>
Specifies that the display is limited to specified PCI slots and PDs connected to those PCI
slots. The
slot_list argument is specified as a series of integers separated by commas
(
1,2,3). The list can also consist of a single integer (1). If the slot_list argument is not
specified, all disks on all slots are displayed.
–ports <port_list>
Specifies that the display is limited to specified ports and PDs connected to those ports.
The
port_list argument is specified as a series of integers separated by commas (1,2,3).
The list can also consist of a single integer (
1). If the port_list argument is not specified,
all disks on all ports are displayed.
–devinfo
Indicates the device disk type and speed.