3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

24.5
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
startrcopygroup
DESCRIPTION
The startrcopygroup command enables Remote Copy for the specified Remote Copy
volume group.
SYNTAX
startrcopygroup [options <arg>] <group_name>
AUTHORITY
Super, Edit
OPTIONS
–nosync
Prevents the initial synchronization and sets the virtual volumes to a synchronized state.
–wait
Specifies that the command waits until the initial synchronization is completed. The system
generates an event when the synchronization is completed.
-t <target_name>
Only start the group on the specified target.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group. The group name can be obtained using the
showrcopy command.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
more information.
EXAMPLES
The following example starts Remote Copy for Group1:
cli% startrcopygroup Group1