3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

23.4
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
shutdownsys
DESCRIPTION
The shutdownsys command shuts down an entire system.
SYNTAX
shutdownsys halt|reboot
AUTHORITY
Super, Service
SUBCOMMANDS
halt
Specifies that the system should be halted after shutdown. If this subcommand is not
specified, the
reboot subcommand must be used.
reboot
Specifies that the system should be restarted after shutdown. If this subcommand is not
specified, the
halt subcommand must be used.
OPTIONS
None.
SPECIFIERS
None.
RESTRICTIONS
■ Access to all domains is required to run this command.
■ Do not issue any commands other than showsys while the system is shutting down.
NOTE: You need access to all domains in order to run this command.