3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

23.2
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
shutdownnode
DESCRIPTION
The shutdownnode command shuts down a system node.
SYNTAX
shutdownnode halt|reboot [option] <node_ID>
AUTHORITY
Super, Service
OPTIONS
–f
Forces the operation so that the command does not require confirmation before
proceeding.
SPECIFIERS
<node_ID>
Specifies the node, identified by its ID, to be shut down.
RESTRICTIONS
Access to all domains is required to run this command.
EXAMPLES
The following example shuts down system node 0 and halts the restarting of the node:
NOTES
■ When issuing the shutdownnode command without the –f option, the system manager
executes a set of validation checks before proceeding with the shutdown.
NOTE: You need access to all domains in order to run this command.
cli% shutdownnode halt 0