3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

4.2
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
addsnmpmgr
DESCRIPTION
The addsnmpmgr command adds an SNMP manager to receive alert (traps) notifications.
SYNTAX
addsnmpmgr [options <arg>] <manager_IP>
AUTHORITY
Super
OPTIONS
–p <port_number>
Specifies the port number where the SNMP manager receives traps. This option is used if
the port number differs from the default of
162.
–pw <password>
Specifies the SNMP manager’s access community string (password), using up to 32
alphanumeric characters. If unspecified, the agents send traps without an access password.
–r <retry>
Specifies the number of times to send a trap (<retry>) using an integer from 1 through 15
if the SNMP manager is not available. If not specified, the number of times a trap is sent
defaults to 2.
–t <timeout>
Specifies the number of seconds to wait before sending a trap (timeout) using an integer
from
1 through 300. If not specified, the time defaults to 200 seconds.
NOTE: You need access to all domains in order to run this command.