3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.212
Command Line Interface Reference InForm OS Version 2.3.1
The columns in the previous example are identified as follows:
■ Id. The virtual volume ID.
■ Name. The virtual volume name.
■ Domain. The domain to which the virtual volume belongs. Valid values are – or
<domain_name>. If the domain does not exist, - is displayed. The Domain column can be
included by using the
setclienv command to set listdom to 1. The listdom option is
also set to
1 if the CLI was started with the -listdom option or if the CLI was started with
the
TPDLISTDOM environment variable.
■ Policies. The current policy assigned to the displayed virtual volume.
The following example displays the snapshot space information:
The columns in the previous example are identified as follows:
■ ID. The ID of the virtual volume.
The following example displays the detailed state information:
The columns in the previous example are identified as follows:
■ ID. The ID of the virtual volume.
■ Name. The virtual volume name.
■ Prov. The provisioning for the VV. Can be one of the following:
◆ full. Fully provisioned VV, either with no Snp (snapshot) space or with statically
allocated Snp space.
◆ tpvv. Thin Provisioned VV, with space for the base volume allocated from the Usr
space that is associated with the
UsrCPG. Snapshots allocate space from the Snp space
associated with the SnpCPG (if any).
cli% showvv -s -p -prov tp* -host hname
cli% showvv -state
Id Name Prov Type State -Detailed_State-
0 admin full base normal normal
------------------------------------------
1 total