3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.208
Command Line Interface Reference InForm OS Version 2.3.1
◆ tpvv. Thin Provisioned VV, with space for the base volume allocated from the Usr
space that is associated with the
UsrCPG. Snapshots allocate space from the Snp space
associated with the
SnpCPG (if any).
◆ cpvv. Commonly Provisioned VV. The Usr space for this VV is fully provisioned and the
Snp space is associated with a SnpCPG.
◆ tpsd. An old-style Thin Provisioned VV (created on a 2.2.4 release or earlier) where
both the base VV and snapshot data are allocated from the
Snp space associated with
the
UsrCPG.
◆ snp. Since the VV is Type vcopy (snapshot) it is the provisioning that is associated with
the base VV.
■ Domain. The domain to which the virtual volume belongs. Valid values are – or
<domain_name>. If the domain does not exist, - is displayed. The Domain column can be
included by using the
setclienv command to set listdom to 1. The listdom option is
also set to
1 if the CLI was started with the -listdom option or if the CLI was started with
the
TPDLISTDOM environment variable.
■ Type. Indicates the copy type of virtual volume and can be one of the following:
◆ base. Base volume (not a copy).
◆ pcopy. Physical copy (full copy).
◆ vcopy. Snapshot copy (virtual copy).
■ CopyOf. Displays the virtual volume from which the copy was made.
◆ ---. The virtual volume is a base volume.
◆ name. The name of the virtual volume from which a copy was made.
■ BsID. If the virtual volume is a base volume or a physical copy, the base volume ID number
is the same as the ID number in the
Id column. If the virtual volume is a virtual copy, the
column shows the base volume from which the copy was made.
■ Rd. Indicates whether the virtual volume is read/write (RW) or read-only (RO).
■ State. Indicates the current status of the virtual volume.
◆ preserved. A logical disk used by the virtual volume has unavailable RAID sets. The
data belonging to the virtual volume is saved on the preserved logical disk. Host access
to the virtual volume is unavailable until RAID sets are made available.