3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)
22.207
InForm OS Version 2.3.1 Command Line Interface Reference
SPECIFIERS
<VV_name|pattern|VV_set>...
Specifies the VV name (up to 31 characters in length) matching the glob-style pattern or
that are members of the supplied VV set will have their information displayed. The
VV_set
name must start with
set:. This specifier can be repeated to display configuration
information about multiple VVs. This specifier is not required on the command line. If not
specified, configuration information for all VVs in the system is displayed.
RESTRICTIONS
None.
EXAMPLES
The following example displays information about all virtual volumes:
The columns in the previous example are identified as follows:
■ ID. The ID of the virtual volume.
■ Name. The name of the virtual volume.
■ Prov. The provisioning for the VV. Can be one of the following:
◆ full. Fully provisioned VV, either with no Snp (snapshot) space or with statically
allocated Snp space.
NOTE: If one or more <VV_name|pattern> are specified, then the virtual
volumes with names that match any of the patterns are listed. Otherwise, all
virtual volumes are listed. The virtual volumes shown include snapshots. Patterns
are glob-style (shell-style) patterns (see Help for sub,globpat).
cli% showvv
---Rsvd(MB)--- -(MB)-
Id Name Prov Type CopyOf BsId Rd -Detailed_State- Adm Snp Usr VSize
0 admin full base --- 0 RW normal 0 0 10240 10240
1 par full base Scott 1 RW normal 128 512 16384 256
2 copy cpvv vcopy Jeff 2 RW normal 0 0 16384 5120
3 vvcp.1.2 tpvv base par 1 RO normal -- -- 16384 10240
4 tpvv full base Eric 4 RW normal 128 512 65536 10240
---------------------------------------------------------------------------------
5 total 256 1024 43008 36096