3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.202
Command Line Interface Reference InForm OS Version 2.3.1
–d
Displays detailed information about the VVs. The following columns are shown:
ID, Name, Rd, Mstr, Prnt, Roch, Rwch, PPrnt, PBlkRemain, VV_WWN, CreationTime.
–pol
Displays policy information about the VV. The following columns are shown:
ID, Name, Policies.
–s
Displays Logical Disk (LD) space use by the VVs. The following columns are shown:
ID, Name, Prov, Type, Adm_Rsvd_MB, Adm_Used_MB, Snp_Rsvd_MB, Snp_Used_MB,
Snp_Used_Perc, Warn_Snp_Perc, Limit_Snp_Perc, Usr_Rsvd_MB, Usr_Used_MB,
Usr_Used_Perc, Warn_Usr_Perc, Limit_Usr_Perc, Tot_Rsvd_MB, VSize_MB.
–r
Displays raw space used by the VVs. The following columns are shown:
ID, Name, Prov, Type, Adm_RawRsvd_MB, Adm_Rsvd_MB, Snp_RawRsvd_MB,
Snp_Rsvd_MB, Usr_RawRsvd_MB, Usr_Rsvd_MB, Tot_RawRsvd_MB, Tot_Rsvd_MB,
VSize_MB.
-zone
Displays mapping zone information for VVs. The following columns are shown:
ID, Name, Prov, Type, VSize_MB, Adm_Zn, Adm_Free_Zn, Snp_Zn, Snp_Free_Zn,
Usr_Zn, Usr_Free_Zn.
-g
Displays the volume’s SCSI geometry settings for VVs. The following columns are shown:
ID, Name, SPT, HPC, SctSz.
NOTE: For snapshot (vcopy) VVs, the Adm_Used_MB, Snp_Used_MB,
Usr_Used_MB and the corresponding _Perc columns have an (*) before the
number for two reasons: to indicate that the number is an estimate that must be
updated using the
updatesnapspace command, and to indicate that the
number is not included in the total for the column since the corresponding
number for the snapshot's base VV already includes that number.