3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.175
InForm OS Version 2.3.1 Command Line Interface Reference
The following example shows system parameters (–param option) for an InServ Storage Server:
NOTES
See setsys on page 21.75 for information on setting the threshold parameters indicated by
the
Value column in the output for showsys –param.
In the output for showsys –param, (from configured settings) indicates that the
system parameters displayed have been successfully read from the Persistent Repository
(PR). If the PR is not available (most likely because of problems with the admin volume), the
output reads
(from default settings) and the values displayed would indicate the
system defaults. When (
from default settings) is displayed, system parameters can
not be updated.
The system capacity information may have some overlaps among Volumes, System, Failed
Capacities.
If the VVRetentionTimeMax is 0, then the volume retention time in the system is
disabled.
cli% showsys -param
System parameters from configured settings
---Parameter---- ---Value----
RawSpaceAlertFC : 0
RawSpaceAlertNL : 0
RemoteSyslog : 1
RemoteSyslogHost : 192.168.6.15
SparingAlgorithm : Minimal
CopySpaceReclaim : 0
EventLogSize : 3M
VVRetentionTimeMax : 336 Hours