3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.159
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
showsnmppw
DESCRIPTION
The showsnmppw command displays the SNMP community string passwords.
SYNTAX
showsnmppw [options]
AUTHORITY
Super, Edit, Browse
OPTIONS
–rw|–r|–w
Specifies that the read-write (–rw), read-only (–r), or write-only (–w) password is displayed.
If not specified, the read/write community string password is displayed.
SPECIFIERS
None.
RESTRICTIONS
None.
EXAMPLES
The following example displays all SNMP passwords:
EXIT STATUS
The following codes are returned indicating success or failure:
■ 0 indicates that the command was successful.
■ 1 indicates that the command failed.
cli% showsnmppw
[password]