3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.148
Command Line Interface Reference InForm OS Version 2.3.1
◆ Starting. Currently attempting to start the group.
◆ Started. Group is started (has Remote Copy running).
◆ Stopped. Group was stopped.
■ Role. The role of the group as either Primary or Secondary.
■ Mode. The mode of the group as either Periodic or Synchronous.
■ Options. The options set for the group.
■ LocalVV and ID. The name and ID of this system.
■ RemoteVV and ID. The name and ID of the target system.
■ SyncStatus. The following values can appear in the SyncStatus field:
◆ New. Volume is configured as a primary volume, but has not yet been started.
◆ Remote. Volume is configured as a secondary volume, but has not yet been started.
◆ Syncing. Volume is currently synchronizing.
◆ Synced. The primary and secondary volumes are in sync.
◆ NotSynced. The volume is not synchronized, likely the result of an initial sync failure or
some other failure.
◆ Stopped. The volumes were previously synchronized, but may be out of sync due to a
group being stopped.
◆ Stale. Volume was previously synchronized, but a previous synchronization attempt
failed. Thus the secondary has a valid copy, just not a valid copy from the last
synchronization attempt.
■ LastSyncTime. The time at which the last volume synchronization was completed.
NOTES
■ If the showrcopy command is used with no specifiers, all configuration information is
displayed.
■ The showrcopy command also displays the group’s domain names if the global
-listdom
option is used or if the TPDLISTDOM environment variable is set.
■ If showrcopy links|groups|targets is used without specifying a name, information
for all links, groups, or targets is displayed.