3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)
22.144
Command Line Interface Reference InForm OS Version 2.3.1
■ PrimSeq. Primitive Sequence Protocol Error. There were errors during the transmission of a
Fibre Channel primitive sequence. This might indicate an error during the loop recovery or
initialization.
■ InvWord. Invalid Transmission Word. Illegal Fibre Channel transmission word received.
■ InvCRC. Invalid Cyclical Redundancy Check. Data corruption in the Fibre Channel frame.
NOTES
■ If the both subcommand is specified, the resulting output text is greater than 80 columns
wide.
■ Internal 3PAR counters are checked every 10 minutes.
■ Each LESB counter is a 32-bit, unsigned integer.
■ LESB counters on Fibre Channel devices cannot be reset.