3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.141
InForm OS Version 2.3.1 Command Line Interface Reference
SPECIFIERS
<N:S:P>
Specifies the port for which information about devices on that port are displayed. This
specifier is required for the
single, both, hist, and diffhist subcommands, and
optional for the
compare subcommand. If this specifier is not used with the compare
subcommand, then all ports are compared. The port is specified as follows:
node
Specifies the node.
slot
Specifies the PCI bus slot in the specified node.
port
Specifies the Fibre Channel port number of the PCI card in the specified PCI bus slot.
RESTRICTIONS
None.
EXAMPLES
The following example displays the reset of internal counters and ports:
cli% showportlesb reset
LESB reset completed