3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.140
Command Line Interface Reference InForm OS Version 2.3.1
Displays differences between historical samples of LESB counters on the specified port of
loop devices.
OPTIONS
–startt <time>
Specifies that samples taken of LESB counters should commence after the indicated time
(
<time>). Time can be specified in hours or as a specific date. When specifying the time in
hours, the following formats can be used:
◆ hh[:mm[:ss]], where hh is the hour, mm is the minute (optional), and ss is the second
(optional).
◆ hhmm, where hh is interpreted as a 24 hour clock.
When specifying the time as a date, the following formats can be used:
◆ mm/dd[/yy], where mm is the month, dd is the day, and yy is the year (optional).
◆ monthname dd[,yy], where dd is the day and yy is the year (optional).
◆ dd monthname [yy], where dd is the day and yy is the year (optional).
◆ yy–mm–dd, where yy is the year, mm is the month, and dd is the day.
–endt <time>
Specifies that samples taken of LESB counters cease after the indicated time (<time>). Time
can be specified in hours or as a specific date. When specifying in hours, the following
formats can be used:
◆ hh[:mm[:ss]], where hh is the hour, mm is the minute (optional), and ss is the second
(optional).
◆ hhmm, where hh is interpreted as a 24 hour clock.
When specifying as a date, the following formats can be used:
◆ mm/dd[/yy], where mm is the month, dd is the day, and yy is the year (optional).
◆ monthname dd[,yy], where dd is the day and yy is the year (optional).
◆ dd monthname [yy], where dd is the day and yy is the year (optional).
◆ yy–mm–dd, where yy is the year, mm is the month, and dd is the day.