3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.128

Command Line Interface Reference InForm OS Version 2.3.1

The following example displays the detailed state of the port:

The columns in the previous example are identified as follows:

■ N:S:P. The physical position of the port, in the syntax node:slot:port.

■ State. State of the port.

◆ OK. Port SFP is operating normally.

◆ Degraded. Port SFP is not operating normally.

■ Detailed State.

◆ config_wait. The link configuration is waiting.

◆ alpa_wait. The link ALPA is waiting.

◆ login_wait. The link login is waiting.

◆ ready. The link is online and ready for use.

◆ loss_sync. The link is not physically connected to anything.

◆ error. The link has an error.

◆ non_participate. The link is not participating.

◆ taking_coredump. The link is a taking a coredump.

◆ offline. The link is offline.

◆ fw_dead. The links firmware is dead.

◆ link_idle_for_reset. The link is idle and ready for reset.

◆ dhcp_in_progress. The link DHCP is in progress.

◆ pending_reset. The link reset is pending.

cli% showport –s

N:S:P --State-- -Detailed_State-

0:0:1 ready loss_sync

0:0:2 ready loss_sync

0:3:1 ready offline

0:5:1 ready loss_sync

--------------------------------