3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.127
InForm OS Version 2.3.1 Command Line Interface Reference
The following example displays information about all Remote Copy ports:
The columns in the previous example are identified as follows:
■ N:S:P. The physical position of the port, in the syntax node:slot:port.
■ State. State of the port.
◆ ready. The port is online and ready for use.
◆ loss_sync. The port is not physically connected to anything.
◆ config_wait. Firmware has yet to be initialized.
◆ login_wait. Fibre Channel adapter is attempting port and process logins with all loop
ports.
◆ error. Fibre Channel adapter has experienced an unrecoverable error.
◆ non_participate. Port is logically isolated from the Fibre Channel loop.
◆ offline. The port is offline.
■ HwAddr. A unique identifier of the port hardware used for Remote Copy connection. For an
RCIP port, it is the MAC address of the port.
■ Rate. Data transfer rate (bitrate) for the Remote Copy interface.
■ Type. Indicates the port connection type.
◆ rcip. Port is used for Remote Copy over IP (RCIP).
cli% showport –rc
N:S:P State HwAddr Rate Type
5:3:2 ready 25320002AC000006 2Gbps rcip
4:1:1 ready 24110002AC000006 2Gbps rcip
0:5:1 ready 0002B39B2013 100Mbps rcip