3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.112
Command Line Interface Reference InForm OS Version 2.3.1
–dk <item>
Specifies one or more PDs. Disks are identified by one or more integers (item).
Multiple disks are separated with a single comma (
1,2,3). A range of disks is
separated with a hyphen (
0–3). Disks must match the specified ID(s).
–tc_gt <number>
Specifies that PDs with total chunklets greater than the number specified are
selected.
–tc_lt <number>
Specifies that PDs with total chunklets less than the number specified are selected.
–fc_gt <number>
Specifies that PDs with free chunklets greater than the number specified are
selected.
–fc_lt <number>
Specifies that PDs with free chunklets less than the number specified are selected.
–devid <model>
Specifies that PDs identified by their models are selected. Models can be specified in
a comma-separated list. Models can be displayed by issuing the
showpd -i
command.
–devtype <type>
Specifies that PDs must have the specified device type (FC for Fibre Channel, NL for
Nearline, or
SSD for Solid State Drive) to be used. Device types can be displayed by
issuing the
showpd command.
NOTE: The following arguments, –tc_gt, –tc_lt, –fc_gt, –fc_lt, –devid,
and
–devtype are used to limit the disks that are used to create logical disks
based on the characteristics of the disk drive.