3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.108
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
showpdata
DESCRIPTION
The showpdata command displays information about the preserved data in the system.
SYNTAX
showpdata [<LD_name>]
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
None.
SPECIFIERS
[<LD_name>]
Requests that preserved data for a specific Logical Disk (LD) is displayed. This specifier is not
required on the command line. If not specified, then the amount of preserved data by LD is
displayed.
RESTRICTIONS
Access to all domains is required to run this command if no LD name is specified. If an LD name
is specified, then access to the domain of the LD is required.
EXAMPLES
The following example displays preserved data information for LD admin.usr.3:
NOTES
None.
cli% showpdata admin.usr.3
showpdata v0.usr.0
Preserved LD raid sets
Ldname Set PreservedCnt
admin.usr.3 0 1
No preserved chunklets