3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.101
InForm OS Version 2.3.1 Command Line Interface Reference
■ CagePos. Position of PD, in the format <cage>:<side>.<mag>:<disk> where <cage>
is the cage number,
<side> is 0 or 1 depending on whether the cage is on the left or right
(from the front view) of the disk chassis,
<mag> is the magazine number (0 through 4) and
<disk> is the disk number (0 through 3) within the magazine. If the position ends with a
question mark (
?) the current position of the drive is not known (for example, the drive
may be missing), and the position shown is the last known position.
■ Type. Device type of the PD.
◆ FC - Fibre Channel
◆ NL - Nearline
◆ SSD - Solid State Drive
■ State. State of the PD can be one of the following:
◆ normal - PD is normal
◆ degraded - The PD is not operating normally. Use showpd -s to find out the detail
information.
◆ new - The PD is new, needs to be admitted before it can be used (see help admitpd)
◆ failed - The PD has failed.
■ Total. Total size of the disk in MB (1024^2 bytes).
■ Normal Chunklets. This area provides information about chunklets that are not reserved
for use as spares.
■ Spare Chunklets. This area provides information about chunklets that are reserved for
use as spares.
■ OK. Number of chunklets with data that is accessible to the system.
■ Fail. Number of failed chunklets.
■ Free. Number of initialized but currently unused chunklets available for use by logical
disks.
■ Uninit. Number of chunklets being cleaned.
■ Unavail. Number of chunklets that are unavailable for use.