3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.99
InForm OS Version 2.3.1 Command Line Interface Reference
◆ SSD - Solid State Drive
■ State. State of the PD can be one of the following:
◆ normal - PD is normal
◆ degraded - The PD is not operating normally. Use showpd -s to find out the detail
information.
◆ new - The PD is new, needs to be admitted before it can be used (see help admitpd)
◆ failed - The PD has failed.
■ Total. Total size of the disk in MB (1024^2 bytes).
■ Normal Chunklets. This area provides information about chunklets that are not reserved
for use as spares.
■ Spare Chunklets. This area provides information about chunklets that are reserved for
use as spares.
■ OK. Number of chunklets with data that is accessible to the system.
■ Fail. Number of failed chunklets.
■ Free. Number of initialized but currently unused chunklets available for use by logical
disks.
■ Uninit. Number of chunklets being cleaned.
■ Unavail. Number of chunklets that are unavailable for use.
The following example displays inquiry information for all disks:
The columns in the previous example are identified as follows:
■ ID. Physical disk ID, as assigned by the system. For unadmitted disk the ID appears as dashes
(
––).
# showpd -i
ID CagePos State ----Node_WWN---- --MFR-- ---Model--- -Serial- -FW_Rev--
0 0:0:0 normal 2210000A330013ED SEAGATE ST3750640NS 3QD0MM1B .AEV,1230
1 0:3:0 normal 2000000C501FD935 SEAGATE ST373207FC 3KT01JF1 XR36
2 0:4:0 normal 2210000A33000CBC SEAGATE ST3750640NS 3QD0T6AN .AEV,1230
3 0:7:0 normal 20000011C60B0AEB SEAGATE ST373207FC 3KT01QZF XR36
4 0:8:0 normal 2210000A33000CCA SEAGATE ST3750640NS 3QD0MTPK .AEV,1230