3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.97
InForm OS Version 2.3.1 Command Line Interface Reference
RESTRICTIONS
None.
EXAMPLES
The following example displays general information for all system physical disks:
The columns in the previous example are identified as follows:
■ ID. Physical disk ID, as assigned by the system. For unadmitted disk the ID appears as dashes
(
––).
■ CagePos. Position of PD, in the format <cage>:<side>.<mag>:<disk> where <cage>
is the cage number,
<side> is 0 or 1 depending on whether the cage is on the left or right
(from the front view) of the disk chassis,
<mag> is the magazine number (0 through 4) and
<disk> is the disk number (0 through 3) within the magazine. If the position ends with (?)
the current position of the drive is not known (for example, the drive may be missing), and
the position shown is the last known position.
■ Type. Device type of the PD.
◆ FC - Fibre Channel
◆ NL - Nearline
◆ SSD - Solid State Drive
■ Speed(K). The maximum RPM speed of the physical disk.
■ State. State of the PD can be one of the following:
◆ normal - PD is normal
◆ degraded - The PD is not operating normally. Use showpd -d to find out the detail
information.
cli% showpd
---Size(MB)---- ----Ports----
ID CagePos Type Speed(K) State Total Free A B
0 0:0:0 NL 7 normal 715008 695552 0:0:1* 1:0:1
1 0:3:0 FC 10 normal 69632 1024 0:0:1 1:0:1*
2 0:4:0 NL 7 normal 715008 695552 0:0:1 1:0:1*
3 0:7:0 FC 10 normal 69632 2560 0:0:1* 1:0:1
---------------------------------------------------------------------------
4 1569280 1394688