3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.95
InForm OS Version 2.3.1 Command Line Interface Reference
–tc_gt <number>
Specifies that physical disks with total chunklets greater than the number specified
are selected.
–tc_lt <number>
Specifies that physcial disks with total chunklets less than the number specified are
selected.
–fc_gt <number>
Specifies that physical disks with free chunklets greater than the number specified
are selected.
–fc_lt <number>
Specifies that physical disks with free chunklets less than the number specified are
selected.
–devid <model>
Specifies that physical disks identified by their models are selected. Models can be
specified in a comma-separated list. Models can be displayed by issuing the
showpd
-i
command.
–devtype <type>
Specifies that physical disks must have the specified device type (FC for Fibre
Channel,
NL for Nearline, or SSD for Solid State Drive) to be used. Device types can
be displayed by issuing the
showpd command.
NOTE: The following arguments, –tc_gt, –tc_lt, –fc_gt, –fc_lt,
–devid, and –devtype are used to limit the disks that are used to create logical
disks based on the characteristics of the disk drive.