3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.92
Command Line Interface Reference InForm OS Version 2.3.1
–i
Specifies a request for disk (inquiry) data.
The following columns are shown:
Id, CagePos, State, Node_WWN, Manuf, Model,
Serial, FW_Rev.
–e
Specifies a request for the disk environment and error information. Note that reading this
information places a significant load on each disk.
The following columns are shown:
Id, CagePos, Type, State, Rd_CErr, Rd_UErr,
Wr_CErr
, Wr_UErr.
–c
Specifies a request for chunklet use totals for each PD.
The following columns are shown:
Id, CagePos, Type, State, Total_Chunk,
Nrm_Used_OK, Nrm_Used_Fail, Nrm_Unused_Free, Nrm_Unused_Uninit,
Nrm_Unused_Unavail, Nrm_Unused_Fail, Spr_Used_OK, Spr_Used_Fail,
Spr_Unused_Free, Spr_Unused_Uninit, Spr_Unused_Fail.
–state
Shows detailed information regarding the state of each PD.
If the
-old option is not specified, the following columns are shown: Id, CagePos, Type,
State
, Detailed_State.
-path
Shows current and saved path information for disks.
The following columns are shown:
ID, CagePos, Type, State, Path_A0, Path_A1,
Path_B0, Path_B1, Order.
Path_A1 and Path_B1 are only shown for systems with drive chassis that are connected to four
nodes.
–space
Shows disk capacity usage information (MB).
The following columns are shown:
Id, CagePos, Type, State, Size_MB, Volume_MB,
Spare_MB
, Free_MB, Unavail_MB, Failed_MB.