3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.91
InForm OS Version 2.3.1 Command Line Interface Reference
COMMAND
showpd
DESCRIPTION
The showpd command displays configuration information about a system’s Physical Disks (PDs).
SYNTAX
showpd [options] [<PD_ID>...]
showpd -listcols
AUTHORITY
Super, Service, Edit, Browse
OPTIONS
-listcols
List the columns available to be shown in the -showcols option described below (see
clihelp -col showpd for help on each column).
The [options] are generally of two kinds: those that select the type of information that is
displayed, and those that filter the list of PDs that are displayed.
By default (if none of the information selection options below are specified) the following
columns are shown:
Id, CagePos, Type, Speed_KRPM, State, Size_MB, Free_MB,
Port_A0
, Port_B0, Port_A1, Port_B1.
Options that select the type of information shown include the following:
-showcols <column>[,<column>...]
Explicitly select the columns to be shown using a comma-separated list of column names.
For this option the full column names are shown in the header. For other options that select
the type of information, the column names may not be exactly the same and there may be
spanning headers on top of the column names.
Run
showpd -listcol to list the available columns.
Run
clihelp -col showpd for a description of each column.