3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.85
InForm OS Version 2.3.1 Command Line Interface Reference
◆ cpu_vrm_overheating. The node CPU VRM overheating.
◆ control_cache_dimm_overheating. The node Control Cache DIMM is overheating.
◆ node_offline_due_to_failure. The node is offline due to failure.
◆ node_shutdown_manually. The node was shutdown manually.
◆ unknown. The node state is unknown.
The following example displays the detailed state of the power supplies:
In the example above:
■ Node. The node ID.
■ PS. The power supply ID.
■ State. The power supply state. Values are as follows:
◆ OK. The power supply is operating normally.
◆ Failed. The power supply is operating abnormally.
◆ NotPresent. The power supply is missing.
◆ Degraded. The fan failure or battery state is not OK.
■ Detailed_State. The power supply detailed state. Values are as follows:
◆ invalid_bat_count. The power supply has an invalid battery count.
◆ dc_failed. The power supply DC failed.
◆ ac_failed. The power supply AC failed.
◆ fan_failed. The power supply fan failed.
◆ charger_overload. The power supply charger overloaded.
◆ battery_not_present. The power supply battery is not present.
cli% shownode -ps -s
Node PS -State- -Detailed_State-
0 0 OK OK
1 1 OK OK
2 2 OK OK
3 3 OK OK