3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.81
InForm OS Version 2.3.1 Command Line Interface Reference
In the example above:
■ Node. The node ID.
■ Drive. The disk drive ID.
■ Manufacturer. The manufacturer of the disk drive.
■ Model. The model number of the disk drive.
■ Serial. The serial number of the disk drive.
■ Firmware. The firmware version on the disk drive.
■ Size. The drive size in MB.
■ Type. The type of disk drive.
In the example above:
■ Node. The node ID.
■ Slot. The slot ID.
■ Type. The PCI card type, either Fibre Channel (FC) or Ethernet (Eth).
■ Manufacturer. The PCI card manufacturer.
■ Model. The model of the PCI card.
■ Serial. The serial number of the PCI card.
cli% shownode -drive
...
Node Drive -Manufacturer- ---Model--- -Serial- -Firmware- Size(MB) Type
0 0 Seagate ST9100821AS 5NJ09DF3 3.AAB 95396 SATA
1 0 Seagate ST9100821AS 5NJ08NA4 3.AAB 95396 SATA
cli% shownode -pci
--------------------------PCI Cards--------------------------
Node Slot Type -Manufacturer- -Model- -Serial- -Rev- Firmware
0 0 FC QLOGIC 2302 D13503 1 3.3.16
0 1 FC QLOGIC 2302 D44171 1 3.3.16
1 0 FC QLOGIC 2302 C31037 1 3.3.16