3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.78
Command Line Interface Reference InForm OS Version 2.3.1
-drive
Displays the disk drive information.
–ps
Displays power supply information.
–s
Displays the detailed state information for node or power supply (proceed with the -ps
option)
SPECIFIERS
<node_ID>...
Displays the node information for the specified node ID(s). This specifier is not required.
RESTRICTIONS
None.
EXAMPLES
The following example displays the operating environment status for all nodes in the system:
In the example above:
■ Node. The node ID.
■ Name. The node name.
■ State. The state of the node. Values are as follows:
◆ --. Cannot determine the overall node state.
◆ OK. The node and its components are operating normally.
◆ Degraded. For T-Series and S-Series nodes, the node is degraded due to a missing,
failed, or degraded power supply. For E-series nodes, the node is degraded to due a
missing or degraded fan.
cli% shownode
Control Data Cache
Node --Name-- -State- Master InCluster ---LED--- Mem(MB) Mem(MB) Available(%)
0 enodec34 OK Yes Yes GreenBlnk 2048 2048 100
1 enodec33 OK No Yes GreenBlnk 2048 2048 100