3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.60
Command Line Interface Reference InForm OS Version 2.3.1
EXAMPLES
The following example displays information for al LDs in a two node system:
The following example displays information for all LDs in a four node system:
The columns in the previous example are identified as follows:
■ Id. The ID of the logical disk.
■ Name. The name of the logical disk.
■ Domain. The domain to which the logical disks belongs. If the domain does not exist, - is
displayed.
■ RAID. The RAID type (0 is for RAID-0, 1 is for RAID-1, 5 is for RAID-5, and 6 is for RAID-6).
■ Detailed_State. The current status of the logical disk.
◆ normal. The logical disk has started and is available for use.
◆ orphan. Both the primary owner and backup owner nodes are down, and the logical
disk’s data is not available.
◆ preserved. Some disks used by the logical disk are missing. Data belonging to the
logical disk is saved on the preserved logical disk.
◆ stopped. The logical disk is stopped, and its data is not available.
◆ stopping. The logical disk is being stopped; normally flushes any in-flight data to disk.
cli% showld
Id Name RAID -Detailed_State- Own SizeMB UsedMB Use Lgct LgId WThru MapV
0 log0.0 1 normal 0/- 20480 0 log 0 --- Y N
1 log1.0 1 normal 1/- 20480 0 log 0 --- Y N
2 pdsld0.0 1 normal 0/1 8192 0 P,F 0 --- Y N
3 admin.usr.0 1 normal 0/1 5120 5120 V 0 --- N Y
4 admin.usr.1 1 normal 1/0 5120 5120 V 0 --- N Y
5 VV111.usr.0 0 normal 0/1 256 256 V 0 --- N Y
6 VV111.usr.1 0 normal 1/0 256 256 V 0 --- N Y
cli% showld
Id Name RAID State Own SizeMB UsedMB Use Lgct LgId WThru MapV
0 log0.0 1 normal 0/-/-/- 20480 0 log 0 --- Y N
1 log1.0 1 normal 1/-/-/- 20480 0 log 0 --- Y N
2 pdsld0.0 1 normal 0/1/2/3 4096 0 P,F 0 --- Y N
3 admin.usr.0 1 normal 0/1/3/2 3584 3584 V 0 --- N Y
4 admin.usr.1 1 normal 0/1/2/3 1536 1536 V 0 --- N Y
5 admin.usr.2 1 normal 1/0/3/2 5120 5120 V 0 --- N Y
6 100_tune.usr.0 1 normal 0/1/2/3 512 512 V 0 --- N Y