3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.50
Command Line Interface Reference InForm OS Version 2.3.1
The following example displays host CHAP properties:
The following example displays all host information:
NOTES
■ If host names or patterns are specified, then hosts with names that match any of the
patterns are listed. Otherwise all hosts are listed. Patterns are glob-style (shell-style)
patterns (see Help on sub, globpat).
■ Host descriptor information is available only for hosts that have been assigned a name
through the
createhost command.
■ A Domain column may be included by using the setclienv command to set listdom to
1. The listdom option is also set to 1 if the CLI was started with the -listdom option or
cli% showhost –chap
Id Name -Initiator_CHAP_Name- -Target_CHAP_Name-
0 queasy10 queasy10 s019
1 foo -- --
cli% showhost –verbose
Id Name Persona -----WWN/iSCSI_Name----- Port IP_addr
0 queasy10 Generic 210000E08B027B60 0:0:1 n/a
1 foo Generic myiscsipath.3pardata.com --- 0.0.0.0
Id Name -Initiator_CHAP_Name- -Target_CHAP_Name-
0 queasy10 queasy10 s019
1 foo -- --
---------- Host queasy10 ----------
Name : queasy10
Domain : --
Id : 0
Location : Rack 35, Position 8
IP Address : --
OS : --
Model : --
Contact : --
Comment : --
Id Name Persona_Id Persona_Name Persona_Caps
0 queasy10 0 Generic SESLun
1 foo 0 Generic SESLun