3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.49
InForm OS Version 2.3.1 Command Line Interface Reference
set:<host_set>...
Specifies that information about all the hosts that are members of set <host_set> should
be displayed. The set name <host_set> must start with
set:. Acts as if all members were
individually specified as parameters to the comment. May be repeated to specify multiple
host sets.
RESTRICTIONS
None.
EXAMPLES
The following example displays detailed host and path information:
The following example displays host descriptor properties:
NOTE: For the following two examples, the Domain column appears only if the
-listdom global option or TPDLISTDOM environment variable was set prior to
starting the CLI.
cli% showhost -d
Id Name Persona -----WWN/iSCSI_Name----- Port IP_addr
0 pe750-07-iscsi Generic 210000E08B023F71 1:3:1 0.0.0.0
1 adt Generic 210000E08B056C21 0:2:1 0.0.0.0
1 adt Generic 210100E08B256C21 1:2:1 0.0.0.0
-- -- Generic 210000E08B023C71 1:5:1 0.0.0.0
-- -- Generic 210000E08B023F77 0:2:2 0.0.0.0
cli% showhost –desc
---------- Host queasy10 ----------
Name : queasy10
Domain : -
Id : 0
Location : Rack 35, Position 8
IP Address : --
OS : --
Model : --
Contact : --
Comment : --