3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

22.12
Command Line Interface Reference InForm OS Version 2.3.1
The following example displays the detailed status of the battery using the showbattery –s
command:
■ State
■ Node. The controller node number.
■ PS. The power supply number.
■ Bat. The battery ID.
■ State. The current status of the battery and can be one of the following:
◆ OK. The battery is operating normally.
◆ Failed. The battery is operating abnormally.
◆ Degraded. The battery is in degraded state.
◆ Not Present. The battery is missing.
■ Detailed_State. The detailed state of the battery and can be one of the following:
◆ Not Present. The battery is missing.
◆ Expired. The battery is already expired.
◆ Failed. The battery is operating abnormally.
◆ InvalidFirmware. The battery has invalid firmware.
◆ Unknown. The battery state is unknown.
◆ Undefined. The battery state can not be determined.
NOTES
■ Battery information is set by issuing the setbattery command. See setbattery on
page 21.12 for more information.
cli% showbattery -s
Node PS Bat -State- -Detailed_State-
0 0 0 OK Normal
0 1 0 OK Normal
1 0 0 OK Normal
1 1 0 OK Normal