3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.88
Command Line Interface Reference InForm OS Version 2.3.1
COMMAND
setvv
DESCRIPTION
The setvv command changes the properties associated with Virtual Volumes (VVs). It can be
used to modify volume names, volume policies, allocation warning, and limit levels, and the
volume’s controlling Common Provisioning Group (CPG).
SYNTAX
setvv [options <arg>] <VV_name|pattern>...
AUTHORITY
Super, Edit
OPTIONS
At least one of the following options must be specified:
–name <new_name>
Specifies that the name of the VV be changed to a new name (as indicated by the
<new_name> specifier) that uses up to 31 characters.
-clrrsv
Specifies that all reservation keys (i.e. registrations) and all persistent reservations on the
VV are cleared.
-exp <time>[d|D|h|H]
Specifies the relative time from the current time that volume will expire. <time> is a
positive integer value and in the range of 0 - 43,800 hours (1825 days). Time can be
specified in days or hours providing either
d or D for day and h or H for hours following the
entered time value.
To remove the expiration time for the volume, enter
0 for <time>.
-comment <comment>
Specifies any additional information up to 511 characters for the volume.
Use
-comment ““ to remove the comments.
-f
Do not ask for confirmation before setting or modifying volumes with retention time
(
-retain).