3PAR InForm® OS 2.3.1 CLI Reference (320-200166 Rev B, March 2010)

21.80
Command Line Interface Reference InForm OS Version 2.3.1
force_idewipe
Specifies that the system wipes the IDE powerfail partition. The system is shutdown and
restarted, during which time all logical disks and VVs are checked.
OPTIONS
–f
Specifies that the command is forced. If this option is not used, the command requires
confirmation before proceeding with its operation.
SPECIFIERS
<system_name> [<system_ID>]
Specifies the name of the system to be started, using up to 31 characters in length.
<system_ID>
Specifies the ID of the system to be started.
<toc_gen_number>
Specifies the table of contents generation number for the system to start with.
<disk_quorum>
Specifies the disk quorum for the system to start with.
RESTRICTIONS
■ Access to all domains is required to run this command.
■ Use this command only when the system cannot start up normally.
EXAMPLES
The following example starts system mysystem in the new system state:
CAUTION: Issuing the setsysmgr force_idewipe command can result in
data loss.
cli% setsysmgr wipe mysystem systemid